In order to make your forklift battery fully functional, you need to add water to it regularly to prevent it from overheating. If your forklift is equipped with lithium-ion battery, it needs enough water level to charge efficiently and safely.
However, due to the risk of acid dilution, you don't want to add too much water to it, but you should still be vigilant to avoid overheating. Given all these nuances, assessing when to add water to the battery can be challenging. Learn how to know when to add water to the forklift battery.
Do not fill up with water before charging
Your battery needs extra space for liquid expansion when charging, so please avoid filling up with water in advance. The water level should be sufficient to cover the lead plate in each battery.
If the water is filled up before charging, it may cause overflow and cause the battery to lose some acid. Acid dilution can significantly shorten the service life of the battery, so you just need to top it up after charging.
Consider how much water you use when dumping
When charging the battery, the forklift battery panel shall be located below the waterline. Don't add water to prevent the dish from overheating when it dries.
Drying the plate will cause the battery to lose capacity and may not work properly. When your plate crosses the line, pour water a quarter of an inch above the plate, but do not add water before charging.
Maintain a consistent schedule to add water to the battery
Time is a key component of adding water to forklift batteries. Usually, if you drive the same forklift every day, you need to add water to the battery once a week. However, any battery that has been repaired or used for a long time should be checked after every five times of charging.
Checking the water level is an important part of regular inspection before forklift operation. If properly maintained, the new battery only needs to be checked every 10 times of charging, but only in the first few years of use. All you need to do is turn on the battery and check the components to check the water level.
In general, if the battery does not work, you will not be able to drive the forklift, so you need to carefully monitor the water level to improve work efficiency as much as possible. However, after knowing how to know when to add water to the forklift battery, there should be no problem maintaining each battery.
