The air cleaner element is like a duplicate of gas entering a small loader. It will screen out the residues and particles to ensure the normal operation of the engine. How do I replace the air cleaner element?
Before equipment maintenance and air filter element maintenance, be sure to shut down the engine and ensure that the safety lever is placed in a clamped position. If replaced while the engine is running If cleaned, dust will enter the engine. When cleaning the air filter element, remember not to use a screwdriver or other special tools to remove the air filter element housing cover or the external filter element. When cleaning, it is not necessary to remove the internal filter element, or dust will enter, causing engine problems. When cleaning the air filter element, do not knock or strike the element with anything. When cleaning, the air filter element cannot be opened for a long time. After cleaning, the filter material of the filter element must be determined If part of the sealing gasket or the application of the sealing gasket is damaged, it cannot be applied again. After cleaning the filter element, when directly checking the excavation of the used gear pump wheel with a light, if there are small round holes or thin parts on the filter element, the filter element needs to be replaced. Each time the filter element is cleaned, tighten it from the outer cover of the air cleaner assembly and mark the cleaning frequency.
Clean the filter element 6 times If the sealing gasket or filter material is damaged, the air filter element needs to be replaced immediately, and the filter element needs to be replaced together; Damaged sealing gaskets and filter materials or filter elements with damaged sealing gaskets shall not be used; Counterfeit filter elements shall not be used. Due to excessive worry and poor sealing, the engine will be damaged when dust enters; When the inner filter element seal or filter material is damaged or deformed, new parts need to be replaced; The sealing position of the new filter element must be checked for dust or oil stains and cleaned; When inserting the filter element, if the plastic on the top expands, or the external filter element is incorrect, and the hard cover is placed on the lock catch, there will be a risk that the filter element cover or the filter element shell of the Jingong New Energy Loader will be damaged.
