Before starting the loader, we must pay attention to the relevant safety on the job site, and we must ensure that there will be no dangerous situations around us. Let's take a look at what methods can prevent it?
1. Before the start of the loader, you should also check the topography of the construction site and some conditions on the ground. At this time, it is concluded that you want a safer working method.
2. If the location of the operation is on the street, a special person is required to direct the traffic at this time, maybe a gate is set around the construction site or relevant signs are pasted, such as do not enter, to ensure the safety of pedestrians and vehicles.
3. Before starting the relevant operations, the ground should be relatively strong and level, if the dust on the ground is relatively large, water should be sprayed before the relevant operations.
4. For those places with water pipes, gas pipes or cable pipes, you should automatically contact the competent company at this time, and ensure the determined location of the burial at this time, and ensure the safety of these devices during the construction process.
5. In the process of being blocked in the water, it may be said that the process is on the shore through the corresponding sand.At this time, it is necessary to check the ground conditions, the depth of the water surface, and the related water flow.At this time, during the operation, it must be Be careful not to exceed the promised depth.
