The cycle of flushing loader accessories is determined by the structure of the system and the degree of system pollution. If the sample of the filter medium has no or little external pollutants, install a new oil filter, remove the flushing plate and install the valve. Establish regular maintenance system for loader accessory flushing system.
? I: check and replace the oil filter for at least 500 hours or 3 months.
? second: clean the oil filter at the inlet of the oil pump regularly.
? third: check whether the hydraulic oil of loader accessories is acidified or contaminated by other pollutants. The smell of hydraulic oil can roughly identify whether it has deteriorated.
? fourth: repair system leakage.
? fifth: ensure that no foreign particles enter the oil tank at the openings of the oil tank ventilation cover, oil filter plug seat and oil return pipe sealing gasket.
?? small makeup reminds you here: if the system uses electro-hydraulic servo valve, the servo valve flushing plate makes the oil flow from the oil supply pipe to the collector and directly return to the oil tank to make the oil circulate repeatedly, flush the system and let the oil filter solid particles. During the flushing process, check the oil filter of loader accessories for 1 ~ 2 hours to prevent the oil filter from being blocked by pollutants. Do not open it at this time. If the oil filter starts to be blocked, replace the oil filter immediately.
?? the normal use of the loader is inseparable from the cooperation of all loader accessories, so it is necessary to ensure the normal operation of all loader accessories.
