Before the start of the loader, we must pay attention to the relevant safety on the job site, and we must ensure that there will be no risk situations around. Let us take a look at which methods can play a preventive effect?
1. Before the start of the loader, you should also check the topography of the construction site and some conditions on the ground. At this time, confirm that you want a safer working method.
2. If the address of the operation is on the street, a special person is required to direct the traffic at this time, maybe a fence is set around the construction site or related signs are posted, such as do not enter, so as to ensure the safety of pedestrians and vehicles.
3. Before starting the relevant operations, the ground should be relatively strong and level, if the sand and dust on the ground is relatively large, the water should be watered before the relevant operations.
4. For those places where there are water pipes, gas pipes or cable pipes, you should automatically contact the competent company at this time, at this time to ensure the direction of the confirmation of the burial, and to ensure the safety of these devices during the construction process.
5. In the process of being blocked in the water, the process may pass through the corresponding sand to the shore.At this time, you must check the ground conditions, the depth of the water surface, and the related water flow.At this time, during the operation, you must Be careful not to exceed the allowed depth.
