Home>Knowledge
It is a common machine fault that the excavator stalls when it is working. Engine speed loss refers to the failure of engine speed reduction during excavator operation. Serious speed loss above 300...
The speed loss of the excavator seems to be a small question, but if it cannot be handled in time, it can cause the excavator to hold the car and other major problems. We hope that the majority of ...
Many customers need to operate and install the failure rate of the cutting machine. The manufacturer of the lower gear pump wheel excavator will teach you several aspects and look forward to helpin...
For small forklift loaders, facing complex daily mining tasks every day, a little carelessness may lead to accidents and safety accidents, or damage to nearby equipment, which will not only interfe...
Precautions for forklift operation 1. Before and after forklift operation, the appearance shall be checked, and fuel, lubricating oil and cooling water shall be added. 2. Check the safety performan...
For the excavator to repair this kind of fault, it should first be distinguished whether the single track is weak or the double track is weak. If single track walking is slow and weak, the result i...
The excavator holding up is a troublesome problem for many operators. First of all, the fault point is not clear, and the problem cannot be solved quickly. Therefore, most of the time, people will ...
The deviation of excavator during walking is a common problem during daily construction. In addition to the bumpy and uneven construction conditions, careless drivers can not find out at the first ...
1. The engine is the key vibration source of the cutting machine. The engine exhaust volume is relatively large, which will cause large vibration during normal operation. Therefore, a flexible conn...
The air cleaner element is like a duplicate of gas entering a small loader. It will screen out the residues and particles to ensure the normal operation of the engine. How do I replace the air clea...
