On December 6, 2024, the Weichai 2025 Global Partner Conference Non Road Power Branch was held in Weifang, Shandong. At the meeting, Weichai and its partners such as distributors and agents jointly discussed new trends in industry development and sought a blueprint for future development. On site release of multiple new non road power 名媛直播 showcased Weichai's foresight and leadership in industry transformation.
Full series low-speed harvester hydraulic powertrain
Accurately responding to the market demand for agricultural equipment
With the transformation of agricultural production models, users' concerns are no longer limited to traditional "strong and not bad", but have shifted more towards higher-level demands such as "fuel efficiency and comfort". In response to this market change, Weichai has launched a full range of low-speed harvester hydraulic powertrains with a power coverage of 125-530ps, which can meet the harvesting power needs of the three major staple foods and economic crops.
The hydraulic powertrain of Weichai's entire series of low-speed harvesters has undergone 3000 hours of extreme working condition testing, demonstrating excellent anti drop performance, effectively reducing crop losses, and achieving increased income and efficiency. In addition, through the optimization of the combustion system, the application of intelligent accessories, the introduction of deceleration matching technology, and the integration of intelligent control strategies, a fuel saving effect of 15% to 25% has been successfully achieved. Weichai also fully considers the comfort needs of operators, reducing noise by 3-4dB (A) and vibration by 30%, providing users with a more peaceful and stable working environment, achieving a comprehensive upgrade in comfort.
The launch of this innovative product is not only a precise response to market demand, but also a concentrated display of Weichai's technological strength and forward-looking vision in the field of agricultural equipment.
WP3.6N hydraulic powertrain and full range of hybrid 名媛直播
Leading the innovation of engineering machinery power
At the meeting, Weichai unveiled the WP3.6N hydraulic powertrain and a full range of hybrid 名媛直播.
The WP3.6N hydraulic powertrain adopts the industry's largest 35 ° engine tilt angle design and multiple power take-off port configuration, greatly improving adaptability, and is the flagship power in the field of small construction machinery.
The WP3.6N hydraulic powertrain has undergone rigorous 2000h bench durability testing, 5000m high-altitude environment testing, and -25 ℃ low temperature testing, and has completed 10000h market operation verification. The B10 has a lifespan of up to 20000h, demonstrating extremely high reliability and durability. Through exclusive fuel consumption reduction technology, the WP3.6N hydraulic powertrain has reduced average fuel consumption by 12% compared to competitors, and single bucket fuel consumption has been reduced by 25%. By combining patent strategy calibration and optimization of intake and exhaust combustion, seamless regeneration and high-efficiency operation have been achieved, bringing significant economic benefits to users.
Weichai's full range of hybrid 名媛直播 cover a power range of 80~500kW, supporting various fuels such as diesel, natural gas, methanol, etc. The power is increased by 25%, and the fuel consumption per square kilometer is saved by 35%~50%, demonstrating strong fuel flexibility and economy; Adopting efficient differentiation of combustion, low resistance air system, and friction reduction technology, reducing fuel consumption by 6.7%; Continuously reduce power consumption by 2% to 3% through multi-objective magnetic circuit optimization, high-efficiency zone directional design, and carrier frequency control; By combining multimodal+overmodulation, junction temperature estimation, and intelligent current decoupling strategies, efficiency is improved by 1% to 2%; The generator and engine are coupled in the high-efficiency zone, and the range extender efficiency is as high as 4.5 kW · h/L, demonstrating extremely high energy utilization efficiency.
The WP3.6N hydraulic powertrain and the full range of hybrid powertrain 名媛直播 are Weichai's precise grasp and positive response to industry development trends, which will promote the green, efficient, and intelligent development of construction machinery power.
Establishing a new benchmark for industry reliability
In recent years, the transformation of construction machinery to new energy has become a trend, but currently, construction machinery batteries mostly use road batteries, which have poor reliability, corrosion resistance, and environmental adaptability, slow charging rate, short lifespan, and low integration level. Faced with the pain points in this industry, Weichai has timely launched a full range of 10 battery 名媛直播 for construction machinery, with a power coverage of 280-765kWh, which can meet the electricity needs of different segmented markets such as loaders, excavators, and mining trucks.
Introduction to Weichai Engineering Machinery Battery
Weichai Engineering Machinery's full range of battery 名媛直播 have been comprehensively optimized for the special working conditions and environmental requirements of engineering machinery. After more than 50 rigorous system level experiments and over 300000 hours of vehicle reliability testing, especially with the support of the "three highs" test, the battery system failure rate has been reduced by 20% compared to the industry average, truly becoming a reliable and durable industry benchmark.
Weichai Engineering Machinery Battery New Product
In terms of technological innovation, Weichai Engineering Machinery Battery 名媛直播 have excellent thermal management performance, with a 60% increase in battery overcurrent capacity and support for 1000V single branch 400A fast charging. It only takes 23 minutes to complete the fast charging of SOC from 20% to 80%, greatly reducing charging time and improving operational efficiency.
In low-temperature environments, Weichai's engineering machinery battery 名媛直播 also perform well in charge and discharge efficiency, with a 5% increase compared to similar 名媛直播, and can charge normally even at extreme low temperatures of -20 ℃. At the same time, the cycle life of the battery system has increased by 60%, completely solving customers' concerns about the battery life throughout the entire lifecycle of the vehicle.
Maintain industry first position in multiple segmented markets
In recent years, the non road industry environment has declined, market competition is fierce, and end customer demand continues to upgrade. In 2024, facing the severe industry situation, Weichai went against the tide and steadily increased its market share in construction machinery and agricultural equipment installation. It maintained its first position in many segmented markets such as crawler excavators, large equipment, 3-ton and above loaders, wide body dump trucks, and tractors.
At the meeting, Weichai announced its 2025 non road industry goals: to maintain the first market share of construction machinery power, further break through the high-end high-power market, expand the first advantage of agricultural equipment power market share, and drive the comprehensive upgrading of tractor and corn power.
New Product Launch Event Site
To fully support the achievement of the 2025 target and continue to lead the industry's development, Weichai will accelerate the upgrading of its product structure, build a product layout covering the entire series and fields, expand the product displacement range to 2-66L, and fully put the N+H+T+M series high-end platform into use. At the same time, it will achieve comprehensive support for hybrid and new energy 名媛直播, covering all fields and sub scenarios of engineering machinery and agricultural equipment.
In terms of research and development, Weichai will integrate global R&D resources, achieve collaborative R&D across the entire industry chain, proactively layout various new technologies, and create technological achievements that lead industry development. At the same time, in response to market feedback issues, Weichai will quickly respond and establish a technical solution team jointly by the R&D and application departments to quickly solve related problems and improve customer satisfaction.
In 2025, Weichai will further integrate internal and external component resources to create hydraulic powertrain 名媛直播 with significant differentiation advantages, providing efficient, energy-saving, and reliable powertrain solutions for customers.
On site press conference
At the same time, Weichai will fully leverage its product portfolio advantages, combined with the strongest service capabilities in the entire industry, while maintaining a stable and growing market advantage in the construction machinery industry, actively exploring incremental markets, and striving to achieve breakthrough growth in market size.
