Five hazards caused by the mixing of the oil in the excavator
Through the two major causes of the excavator oil that can not be mixed, we know why the excavator oil can not be used mixed, and then we talk about what harm will be caused by the mixing of the engine oil in the excavator, and the master to make a reference to the owner of the five damage caused by the mixing of the oil of the excavator.
What harm will be caused by the mixing of the machine oil
1, the exhaust pipe is smoked, such as black smoke or blue smoke. The oil is very likely to be thinned after mixing the oil, so it is easy to be brought into the cylinder to burn the engine, so that the engine is blue smoke. After mixing the oil, it may also make the cylinder tight and easily cause the engine to smoke the black smoke.
Black smoke from the engine
2, speed up the formation of oil mud. The oil sludge formed in oil oil will reduce the heat dissipation of the lubricating oil so that the engine can easily form high temperature, which causes the engine to fail easily. And some oil sludge is granular solid, which accelerates the wear of the engine. It is easy to cause the lubrication oil to flow back bad, and the engine will not get lubrication. The consequence is very serious.
Accelerating oil sludge formation
3, the piston rod or piston ring has discoloration. The mixed oil may lead to the change of its sealing performance, which can easily cause discoloration or damage to the piston rod or piston ring. For a long time, the piston rod or piston ring will be worn seriously and the life of the engine is affected.
Discoloration of the piston ring or piston rod
4, the piston ring breaks. The oil viscosity changes after mixing, not only may be smaller, but also may become larger, but when the oil viscosity becomes larger, the lubrication effect will decrease correspondingly, which may lead to the fracture of the piston ring.
Fracture of piston ring
5. The piston and cylinder are badly worn. If the lubricating film of the lubricating oil is destroyed, it will cause serious wear and tear of the piston and cylinder. After the mixing of the oil, the wear resistance of the lubricating oil may be greatly changed, which will lead to the extremely unstable lubricating film formed by the lubricating oil, resulting in the serious wear and tear of the piston and cylinder.
Serious wear and tear of cylinder piston
The top of this is the five damage that can be caused by the mixing of the engine oil. Here, some of the friends of the excavator may say, "I've done the oil mixing, and there's nothing wrong with you, you're alarmist."
