The use of forklifts has a lot to do with our maintenance:
What needs to be reminded here is that in order to better detect and prevent forklift failures, when carrying out forklift forklift maintenance common sense maintenance and maintenance work, everyone must do the following four aspects of inspection work in order to truly Complete maintenance of the forklift.
I. Testing required in the transmission system
The transmission system of the forklift is the main source of power for the forklift. Therefore, to ensure the smooth operation of the forklift, everyone must ensure the normal operation of the transmission system. When testing the functions in this area, you need to pay more attention to. In terms of peripherals, you should first do a good job of testing the tires to ensure the stability of the tires and repair some worn parts in time to prevent tires from slipping during work. phenomenon. In the maintenance of the internal transmission system, everyone also needs to do a good job in the detection of the brake system and adjust the sensitivity to ensure the safety of the operation. In addition, in the adjustment of transmission bearings, we should fully ensure its flexibility in order to achieve more efficient forklift operations.
Second, the detection required in the circuit system
The circuit system is a basic guarantee for the operation of the forklift truck. If there is a problem in this area, it will likely directly affect the function of the forklift truck. In this regard, when carrying out forklift maintenance work, everyone needs to conduct a comprehensive inspection of the circuit system. In addition to ensuring the sensitivity of each circuit's own work, everyone must do a good job of checking the line for wear or damage, and timely replace some affected Circuit elements with severe damage or abnormal functions, and some fuses that have been used for a long time should be replaced. In addition, in order to reduce possible problems in the operation of the circuit system, everyone must also clean the wiring and avoid dust. Or moisture affects the normal operation of the forklift circuit.
Third, the testing needs to be done in the hydraulic system
As for the hydraulic system of the forklift, in view of the normal working conditions, everyone should also make timely adjustments according to the status of the forklift. In this regard, everyone should do the adjustment and replacement of the hydraulic oil as needed to avoid possible oil leakage or abnormal consumption. Although these aspects seem to have little effect, in consideration of comprehensive protection, we still need to do a careful inspection to avoid the instability of the hydraulic system function, which will cause you unnecessary operation problems.
Fourth, the inspection required in terms of chain components
One thing that needs special attention is that since the after-sales maintenance chain of the forklift truck runs for a long time in the operation, and because its wear situation will be more serious, the inspection work in this regard should also be taken as the focus. Generally speaking, in order to maintain the forklift chain well, we need to determine the movement of the crane and the lifting chain, repair the chain cracks in time, and also need to completely replace some of the more severely damaged chains. Many times, if you want to ensure work efficiency, the role of these chains is indispensable.
Of course, in addition to the above four aspects, there are still some other problems when detecting the forklift. However, for the treatment of these problems, you should take your actual work as a reference, and you must always pay attention to the forklift's Working status, find out its abnormal situation in time, so that problems can be found as early as possible, and troubleshooting can be done well.
Safety supervision bureau: electrician's card, welder's card, high-altitude card, high-voltage card
Construction electrician; gantry tower crane; scaffolding; lift; heavy signal lineman; bridge-gate tower crane; gantry crane driver;
Elevator safety management; safety management of hoisting machinery; lifting command; safety maintenance of elevator machinery; hundreds of types of pressure vessels;
