Folding boom aerial trucks and telescopic boom aerial trucks are the two leading types of aerial work trucks. Many users will have questions. What are the differences between the two? Which one is more practical?
The most direct difference between them is first of all the difference in appearance. The appearance of the folding arm aerial work vehicle is generally 2 straight arms or 3 straight arms folded. The boom can be deployed separately and extended. At different angles, this type of boom has the advantage of being able to rotate with a single arm, a large extension angle, simple operation, and relatively low cost.
The telescopic boom aerial work vehicle is relatively simple in appearance. Generally, the telescopic device can be seen on the boom. The working platform connected to the front of the boom. The boom is hydraulically extended. The advantage of this boom is that the operating arm is extended and Short recovery time, good stability, stable working conditions and low failure rate.
In actual working conditions, the knuckle boom aerial work vehicle is generally suitable for aerial work in the plant area, or for road and bridge maintenance.
The telescopic boom aerial work vehicle is generally suitable for outdoor working sites where the telescopic boom can be extended in a relatively empty environment, such as: street lamp maintenance, and replacement of billboards.
I believe that through the above understanding, everyone can basically distinguish the difference between the folding arm aerial work truck and the telescopic boom aerial work truck. If it is practical, it depends on the working conditions in which the vehicle is ultimately used, and the right work The situation is the most practical!
