High-altitude operation vehicles have high comprehensive technical level, high operation height, complete specifications and varieties, diverse structure types, and rich functions. Generally speaking, the technology and market of high-altitude operation vehicles are relatively mature. Typical 名媛直播 have high-altitude operation and emergency management. , Rescue and other functions, with a variety of safety protection measures, adapted to work in various sites.
There are various forms of aerial work vehicles on the market. Let's take a look at the three most common types on the market, including vertical lift, folding arm, and telescopic arm.
High-altitude operation vehicle refers to a vehicle that is more than 3 meters in height and is controlled by a hydraulic or electric system with multiple hydraulic cylinders, which can be lifted up and down for work. Manned aerial work vehicle with hydraulic transmission
Vertical lift aerial work vehicle adopts the chassis of automobile, tricycle or battery car as the platform chassis, and uses the vehicle engine or DC power as the power, which can drive and drive the platform to rise and fall. It is widely used in urban construction, oil fields, transportation, municipal administration, factory areas Aerial work in the industry.
Telescopic boom aerial work platform is a product that serves mobile aerial work in various industries such as aerial work, equipment installation, and maintenance. Telescopic boom aerial work platforms are mainly divided into straight boom aerial work platforms and curved boom aerial work platforms. Mostly used in shipyards and other places with high requirements. Such machines have better safety and easy movement, but the cost is high.
Articulated aerial work truck can work overhang, cross a certain obstacle or lift at one place to perform multi-point work; the platform has a large load capacity, which can be used by two or more people to work at the same time and can carry certain equipment; the lift platform moves Good performance, convenient transfer site; beautiful appearance, suitable for indoor and outdoor operation and storage. Applicable to large-scale operations such as stations, docks, shopping malls, stadiums, community properties, factories and mines
Precautions for aerial work truck operation:
1. Before use every day, you must check whether the aerial work vehicle has been properly maintained.
2. Before operation, you must be sure that the aerial work vehicle is parked on a solid level ground, make sure that the hand brake has been braked, and all necessary accessories must be in place (such as tire pads, safety warning flags, etc.). The outriggers must be supported on solid ground to ensure stability. If you must work on a slope (up to 30). The outriggers must be fully extended and work on the high slope side.
To get on or off the car or bucket, use the provided ladders, steps or pads.
3. The operator on the bucket must wear the protective equipment specified in the safety regulations and fix it on the safety anchor ring.
4. The protective equipment used by the operator must be consistent with the work requirements and must meet safety standards.
5. When operating equipment such as swings, booms, etc., it must be confirmed that there is no traffic interference, no obstacles or interference from high-voltage lines.
6. Be sure to keep pedestrians away from aerial work vehicles and keep a certain distance from the work area.
7. It is strictly forbidden to stand under the boom.
8. The control valve handle must be operated slowly to achieve smooth movements, prevent sudden start or stop, and prevent solid objects from contacting the arms and the bucket, such as branches, buildings, etc.
