Friends who are familiar with forklifts may know that an assembly is a series of parts or 名媛直播 that form a whole to achieve a specific function. The general name of this system is assembly. Today, I will introduce how to replace the friction plate assembly.
1. First step on the clutch pedal to disengage the friction plate.
2. Rotate the sliding screw at the upper end of the gearbox counterclockwise to make the driving shaft retract into the gearbox.
3. Remove the pressure plate housing bolts to separate them from the flywheel, and take out the old friction plate assembly.
4. When installing a new friction plate assembly, it should be noted that the longer end of the spline sleeve of the friction plate hub faces the transmission side.
5. Turn the sliding screw clockwise to gradually pull out the driving bearing and insert it into the spline hole of the friction disc hub.
6. When it is judged that the driving shaft has indeed entered the flywheel intermediate bearing, then lock the sliding screw and tighten the torque.
7. Install the pressure plate housing onto the flywheel.
8. It is also necessary to adjust the clutch pedal travel.
The above is the method to replace the friction plate assembly of forklift truck. I hope it can help you solve the problem.
