1. Before removal, it should be noted that before the removal and installation procedures, the switch should be placed in the off and off position, the battery plug should be disconnected, and the control lever should be used to release the residual pressure of the conduit. Keep the working environment clean and avoid entering the interior when in place. When disconnecting the conduit, cover the surrounding area with a rag to avoid oil contamination of other parts. Do not allow foreign objects to enter when connecting the conduit. The disassembled parts and components shall be placed on cleaning paper or rags and used for hours to avoid pollution, scratches or dents. Suspension and lifting shall be carried out by professional maintenance personnel of storage electric forklift. Two people are required to work together to carry heavy objects.
2. The forklift shall wind the sealing belt on the conical thread, and the fragments of the sealing belt are not allowed to enter the hydraulic pipeline. When connecting each hydraulic element, use O-ring at the joint. Before installation, install a guide on the joint thread, and then insert the O-ring along to avoid damaging the O-ring. Tighten the joint by hand and confirm the joint position before tightening the lock nut to the specified torque.
3. Release the hydraulic oil before removing the oil suction pipe.
4. The hose shall be checked for leakage, aging or damage before disassembly. The hose shall be replaced. Leaking or damaged connections should be replaced.
5. Before disassembly, the conduit shall be checked for leakage, bending, fracture or scratch. The storage electric forklift maintenance company shall be notified to replace the conduit. Leaking or damaged connections should be replaced.
The above is about the disassembly method of the hydraulic pipeline system in forklift maintenance. I hope it can help you.
