After a long time of operation, wheel loader is covered with oil. The editor edited the cleaning process of the loader, so that the strong boss can operate it.
Process 1 First prepare for it, wear rubber gloves, then wear a pair of protective gloves, double-layer protection, so that the rubber gloves are not simply broken, first scrape the butter on the surface of the object to be washed with a scraper, scraper Use a flat-blade screwdriver to scrape out of reach.
Process 2 Pour the diesel into the watering can and spray it to the butter. After 10 to 30 minutes, perform another scraping wash. This time you can use a steel ball to scrape the dirt and scrape hard. Generally, the paint will not be scraped off.
Process 3 Run out of diesel oil, pour in heavy oil cleaner, and spray. Here are a few places to pay attention to. (Heavy oil cleaner has a strong ability to remove oil, spray a little on the paint before use to perform the so-called skin test, I have tried some machine paints Too bad or the time is too bad. After spraying, it will cause the paint to peel off and whitish. This thing is also very corrosive, which will corrode the skin and nails. It hurts and itches. (Conditions can bring glasses, or buy a heavy oil cleaner that does not hurt your hands)
Process 4 After spraying the diesel oil and heavy oil cleaner, the butter starts to soften. Repeat process 1 again, and then scrape the dirt again without removing some scrapes. At this time, you need to use hand powder. This thing Specially degreased, and then combined with steel balls can easily remove those oil stains that can not be scraped.
Process 5 The oil stains are almost cleaned up. At this time, there is a lot of oily water on the paint surface. At this time, use the washing powder to mix the water, and then use the washing powder water to wipe the paint surface.
Process 6 Rinse with a high-pressure water gun, which is basically clean. No high-pressure water gun can be washed slowly with clean water, and it can also be washed very clean. If it is not clean, repeat the above process.
