When the loader is in use, in order to ensure the good efficiency of the cooling system of the small machine, all components of the cooling system shall be thoroughly cleaned, fastened and lubricated before entering summer, and the scale in the cooling system shall be cleaned as much as possible, so as to improve the heat dissipation efficiency, keep the cooling system unblocked and accelerate the cooling water circulation. So, is there a temperature reason for our common loader water tank overflow? What other reasons? Let's see.
? there are two small reasons: the water tank cover is damaged, and the damaged water tank cover can be replaced. If the cylinder gasket is damaged, replace the damaged cylinder gasket.
?? another problem is that the water temperature is too high due to the problem of the cooling system: the temperature controller cannot be opened, the water pump is broken, the water tank is blocked, the water pump belt is broken, aging and slipping, and the cooling fan blade is faulty and does not run. Repair or replace according to the fault cause: dismantle, clean or repair the thermostat that is stuck or not tightly closed; The water pump is damaged and needs to be replaced; The blocked water tank needs to be dredged; New water pump belt; Repair or replace the cooling fan.
