Consumers who buy second-hand forklifts are nothing more than to save costs. However, with the increase of forklift service time, its own value is decreasing. At present, there are many types of vehicles in the market, with rich brands and cross prices. Which types of vehicles have high value preservation and high residual value? According to the analysis of professionals, the main factors affecting the residual value of used cars are summarized as follows.
1、 Identity characteristics of the vehicle
The "origin" of the car itself has a great impact on the residual value of the vehicle. Compared with official cars and private cars, taxis and rental cars are in poor use. They have more mileage and short scrap life in the same time, so their residual value is basically only half of that of other types of cars. Generally speaking, vehicles with high residual value are private vehicles and vehicles of large institutions.
2、 Brand share of vehicles
Like other 名媛直播, 名媛直播 with high popularity and market share will greatly improve their value. In China's used car transactions, the value of Heli forklift, Hangzhou forklift and Japanese brand vehicles is higher than that of brands from other places of origin, and the people have a high degree of recognition.
3、 Vehicle quality and technology
As a comprehensive product, the car has high requirements for safety, maneuverability, comfort, technology, environmental protection and energy saving. If the vehicle itself is of low quality and poor technology, the vehicle condition will be very poor after three or five years of use. Therefore, the "cheap goods" manufactured by some small manufacturers tend to have a low degree of preservation and serious vehicle depreciation.
4、 Service condition of the car itself
Vehicle condition is one of the main determinants of the residual value of the vehicle itself. The price of vehicles with the same service time varies greatly according to different vehicle performance. If there are large repair traces and accident traces in the key frame, chassis and engine of the vehicle, the residual value of the vehicle itself will be greatly reduced. In contrast, the "residual value loss" caused by other damage of the vehicle is much smaller. For example, the tail light is not on, tire wear and so on do not have a great impact on the residual value of the vehicle.
5、 Vehicle maintenance and use cost
Wise consumers can afford to buy a car, and the daily use and maintenance cost of the car also has a great impact on the residual value of the car. Therefore, most of some consumers choose Heli and Hangzhou forklift, and there are more second-hand forklifts! Some large manufacturers have many service outlets in Shanghai, with good maintenance quality, cheap spare parts, low daily maintenance cost and low fuel consumption. These items alone can save consumers thousands of yuan and tens of thousands of yuan of necessary expenses every year. These cars are economical and will inevitably attract more used car buyers. Therefore, the convenience and economy of vehicle use and maintenance also affect the residual value of the vehicle itself. Some imported cars and models of small domestic manufacturers are often made into residual value because of few spare parts and high maintenance price.
Choose second-hand forklift
The purpose of buying second-hand forklifts is to save investment costs and produce good economic benefits as soon as possible. However, if you don't choose a good forklift, you may buy a medicine can, delay production and maintain it every day. Isn't it very disturbing? Next, let me briefly introduce what should be paid attention to in the selection of second-hand forklifts?
First look: what do you think? Look there? Stand in front and check whether the clearance between the upper and lower parts of the gantry is consistent. The above and lower parts are different, which proves that the forklift has worked for a long time due to overload or had an accident. Squat down and check whether the steering system below the front and rear is consistent with the introduction. The steering is divided into mechanical and hydraulic, and the hydraulic pressure is also divided into full hydraulic and mechanical hydraulic mixed. Full hydraulic, which is commonly known as horizontal and straight cylinder. The mechanical is called triple plate, which may be called differently in different places, You can understand the specific meaning. See whether the clearance of all connecting parts is large. If it is large, it proves that the utilization rate of this car is high. After buying, it is likely to increase the maintenance cost.
Listen: start the car, listen to whether the sound of the engine has an obvious answer, and whether the engine runs smoothly. After adding the long throttle for several times, release the throttle to see whether the response of the engine is sensitive. If there are defects, you should know how to do it. Try: no-load test run, full load, depending on the performance of the whole vehicle. If it can reach more than 85% of the new car, it should be good. Don't trust those overload test runs, The general problems of large throttle test run are not easy to find. When no-load, the load should be small throttle and medium oil, stop and shut down when full load, and check whether the goods on the door frame sink. The time should be about 5 minutes. The above is only personal experience for reference.
