"Safety is the day, life and death. The car is safe, the whole family is happy! " - Peng Guojun
Peng Guojun, engaged in the hoisting industry for 11 years. Everyone who knows Peng boss knows that he is serious in his work and can not tolerate any flaws in his work. This is well known in Qitaihe, Heilongjiang, and is well received by customers.
In May, Peng took part in Xugong's "guarding hoisting safety" public welfare activities and won fifth good results. He expressed his support for Xugong in the industry and invited many friends around. "By participating in activities, we can enhance our understanding of safety hoisting so that we all have a deep understanding of the importance of safety hoisting." As for hoisting safety, Peng boss concluded: mainly in "strict, fine, solid" work hard.
"Strict" - rigorous examination, no intention
"Strict" is that Peng boss requires himself to be upright and rigorous when he hoist the construction, and can not relax the main idea.
Peng said that he would check his crane before going out of work. First, confirm whether the equipment has the conditions of lifting operation, and confirm it is correct. The items that must be checked are: whether the fuel, the lubricating oil, the hydraulic oil are sufficient, the machine parts, the components (hydraulic, pneumatic, electrical) are good, the safety device is damaged, the failure of the tire, the tire pressure is sufficient, the cab safety device, the control device, the dashboard, the signal device are flexible, reliable and so on.
After checking the equipment itself, Peng's owner has to check the construction work environment. He should pay attention to whether the site is neat, the ground is flat and solid; the wind speed is more careful than the 4 level wind, and the operation is more than 6. No obstacles such as high voltage lines can be found in the radius of gyration. If so, hoisting should be carried out outside the safety distance requirement.
"Fine" - not with the heart, not blind
"Thin" is the relevant procedure that Peng boss requires the driver to carry out safe operation in hoisting process. He can not operate arbitrarily and blindly.
Peng said, there are many causes of serious accidents, among them, because of the most accidents caused by illegal operations, dry hoisting to grasp the foundation, the realization of safety construction must play a good basic work. The prevention of safety accidents, the driver must be trained, and have a good sense of safety, sense of responsibility, and conscientiously implement the safety operation regulations, according to the safety operation technical requirements, can not exist by fluke psychology, feeling operation.
Every time hoisting, Peng boss will carefully study hoisting construction method, and make safety technical disclosure with party a related personnel, strictly implement the "ten no hanging" criterion.
"Real" - normal and regular maintenance
"Real", it is Peng's boss to ask himself to maintain the equipment carefully, prevent in the bud, ensure that every trip does not occur safety accidents, to avoid equipment loss to the maximum extent. He often said, "if you want to keep your equipment clean, do your maintenance first!"
To maintain the normal state of the crane, it also depends on our daily maintenance and maintenance. According to Peng, the internal mechanism is bound to change in varying degrees as the equipment is running, for example, with the increase in service life, the parts gradually emerge to varying degrees of loosening, wear, deformation, corrosion, aging, and fouling. For some "brutal" drivers, cranes are "not able to afford injuries" and can even cause failures and mechanical damage. If it is not maintained in time, the performance of the equipment will be deteriorated gradually, and the power, lifting performance and reliability will not be said first. In use, it may also lead to major failures or serious accidents.
This requires regular maintenance of the equipment, and in the work of the eye, ear, hand touch, nose smell and experience and other methods to prevent and eliminate the safety of the crane hidden danger. Peng said that it needed equipment managers for years of experience. If it was the owner of the new entry, it was advised to keep in touch with Xugong after service and maintain the equipment in strict accordance with the periodic table.
Xugong crane, most like XCT25L5
Peng said that in his 11 years of career, he had driven many brand 名媛直播, but his favorite product was Xugong crane. In his view, Xugong crane is synonymous with "safety" and "stability".
Referring to the XCT25L5 that started in November last year, Peng said to him: "in the hoisting of 'gomo', 'probe', and in the hoisting of the middle and long arms, my XCT25L5 can hardly touch his opponent." Because the maximum lifting height 50.2m of the five section 42m long main arm of XCT25L5 is about 50.2m, and the lifting performance of the main boom has been fully ahead.
XCT25L5 has also continued the gene of Xugong crane family, matching the new energy saving hydraulic system, the micro motion performance is better, the efficiency is higher, the durability is stronger. This is because the XCT25L5 main hook is 8 times the maximum, leading the same product 20%. The product adopts the single board arm and the compact tail design, with a larger lap ratio, which makes the bearing capacity of the boom better!
In the operation, Peng boss was delighted. Since he bought XCT25L5, he has given him many opportunities to work. XCT25L5 has the appearance of the atmosphere, has a head, and it "big, small" work "to eat", a little less than its tonnage of a higher level equipment, and foreign quotations more than the price of others "affordable", the profit is also a lot higher than the other brands of 25t equipment.
"Do hoisting is the primary purpose of making money. But the safety hoisting must not be forgotten. At the same time, we must have a "safe, safe and efficient Crane" so that we can earn money properly. Mr. Peng said.
