Home>Knowledge
Every enterprise and every application needs the right cargo handling equipment. There are many forklift models and solutions for in store operations. This is why we have selected some forklifts fr...
Precautions for battery forklift operation: 1. Keep proper starting speed when starting, and do not rush; 2. Pay attention to the voltage of the voltmeter. If it is lower than the limit voltage, th...
The trafficability of stacking forklift is the ability to overcome road obstacles and pass through various roads and portals, which mainly depends on the geometric parameters, power, traction capac...
Troubleshooting of forklift gear shifting fault: Cpcd5aiiz forklift has strong impact and abnormal noise when it is in gear. Because the vehicle is equipped with hydraulic shift fixed shaft variabl...
Maintenance methods for main parts of forklift gear pump: 1. Forklift gear: the outer circle of the gear is worn and glued, which increases the radial clearance. If it is light, it has no obvious i...
Repair method for deformation of forklift gantry: The deformation of forklift gantry can be eliminated by correction method. When the bending and twisting deformation are small, it is allowed to us...
Method for repairing wheel disc, wheel hub and tire of forklift truck: 1、 Repair of forklift wheel disc: 1) If the bearing hole of the bolt is worn, the roundness error is greater than 1.5mm or the...
Repair method of drive axle housing of forklift truck: The drive axle housing of the forklift is firmly installed on the frame of the forklift. Due to the rigid connection between the drive axle an...
The hydraulic transmission device can be installed on the forklift for trial operation, and the drive axle should be lifted during operation. The specific steps are as follows: 1) Before the inspec...
The inspection and repair of forklift universal joint are: 1. Damage and repair of universal joint spider 1) When there are nicks and dents on the surface of the cross shaft journal and the wear of...
