How can we make the slope good and meet the construction requirements? First, say the simplest loose slope, the excavator is on the high slope of 2,3 meters, assuming that the slope is a straight face of dozens of meters long, and this surface can be divided into the top of the slope, the slope, the bottom, if the construction does not require the slope, it also puts the lime line, the master will repair the slope. It is the simplest way to do it. The slope is the most suitable for the novice hand. If you want to do a good job, you want to make the mud allocating, that is, the whole slope is made out. It is straight from the top of the slope to the bottom of the slope, and the beginning to the end is straight. This is the premise of ensuring the consistency of the slope. A beautiful first step. Follow the excavator and keep the chain parallel to the top of the slope. The advantage of doing this is that you don't have to turn to adjust the position of the bucket when you press the slope. 200 of the excavator, 0.8 of the bucket, and after a wide slope of the bucket, then press the next bucket, and you will probably walk 4 pieces of bone. If you want to be quick, you can hear the sound. The first fight is to be repaired. The first bucket is to be repaired. It is important that the first fight must be repaired and leveled; the straighten is to see it with the eye, before it has been divided into mud, and it is OK to see the punctuality; the leveling is the slope that you press out and the ash line is parallel, this can first be pressed on the grey line with the bucket teeth, and the distance between the two sides of the teeth and the gray line, and then extend. After a few meters, then look at the slope, then see the slope has not. Change, do not keep a straight line, usually focus on the bottom of the slope and the slope {see a master repair slope has no intention, look at the bottom of the slope, one is not careful, the slope bottom is not straight. There is a mistake to see, especially the soil with stone or the weathered stone, the steep slope of the words, mending can not be supplemented. And repair the actual slope excavator is mostly from the upper and lower repairs, for the novice, the view is not good, the slope is not good grasp, the personal suggestion is not familiar with the machine look, especially when the long bucket teeth are more careful, the novice is more easy to go out. In a narrow environment, sometimes it is possible to repair the slope in a narrow environment. There is no way to repair the front side by the rotation and the big arm. It is the best to repair the slope in the side. It is the best to repair the slope in the side. In order to avoid reworking, so as to avoid rework. All of the above mentioned are basic common sense of slope repair. In depth, words are difficult to express, and the teachers who have severe slope repair are also not repaired until good and fast. This process needs to be constantly summed up experience, learning with others, and flexible use and flexibility. Generally speaking, Slope repair is a test of carefulness and patience, eyesight and self-control for beginners.
