Proper maintenance of loader accessories is an important condition to prevent loader accessories from failure and ensure high quality, high efficiency, low consumption and safe work. Therefore, the loader accessories must be maintained timely and carefully according to the following provisions.
??1. Check whether the electrical system lines and electrical components are normal; 2. Fill lubricating grease according to the instructions of the lubrication diagram of the whole machine;
??3. Check the liquid level if necessary (including transmission oil, hydraulic oil, brake fluid, engine oil, fuel and water tank);
??4. Open the drain valve of the air reservoir to drain water;
??5. Check parking brake and parking brake effect;
??6. Check the tire pressure (inflate according to the pressure specified in the maintenance manual);
??7. Check the tightness of the hydraulic, steering and braking systems of the working device, and clean the respirators of the braking system, gearbox system and hydraulic system;
If the loader manufacturer chooses to use the loader as a professional accessory, it will bring great risks to the quality of the loader. If the loader manufacturer chooses to use the loader as a professional accessory, it must be used for the loader assembly.
?? then our specific selection method is to select according to the purpose of our loader, because different working devices are different in different environments. When selecting loader accessories, we need to classify them according to the model of loader, such as common single bucket loader, according to different engine power, transmission form The walking system structure and loading mode are classified.
?? in addition, when selecting the loader, the braking performance of loader accessories should be fully considered, including multiple braking, parking braking and emergency braking.
? there are three types of brakes: shoe type, caliper disc type and wet multi plate type.
?? the driving mechanism of the brake generally adopts the force adding device, and its power sources include compressed air, air top oil and hydraulic pressure.
?? at present, the commonly used air top oil braking system generally adopts double circuit braking system to improve driving safety.
