Everyone knows the lubricating oil, cooling, cleaning, anti rust and other functions, the correct use of the oil is a necessary part of the maintenance of the machine. No matter when the oil is selected, and in the process of adding oil, there are many points to be paid attention to. What should we pay attention to when changing the oil to the excavator?
1. remember that the oil should be replaced regularly
Oil is the same as the blood of engineering machinery. Each oil needs regular replacement and maintenance. Oil is of course not an exception for the engine running normally. The oil viscosity is too long and the engine temperature is too high and the cylinder piston is deformed at high temperature. It is also to filter the engine oil. The impurities in the oil and the oil filter should be replaced regularly.
2. do not use inferior oil
When purchasing choice oil, do not buy inferior oil because of the quality of the oil, because of the quality of the oil, it directly affects the service life of the engineering machinery and equipment. The inferior oil makes the turbocharger lubricate badly, the wear is too large and the intake effect is not good. It is suggested that everyone should choose the original plant or replace the pure original factory fittings. If you want to know more about how to identify oil 名媛直播, you can read "buying fake oil is very harmful to digging machines. How to identify all kinds of construction machinery oil?"
3. different grades of oil can not be mixed
Different kinds of oil added in the process of production of chemical or physical effects of additives are different, the different additives mixed together may cause chemical reactions, in addition, the same manufacturer's no grade oil can not be mixed, can not be greedy for this small price.
4. the more oil you don't add, the better
There are a lot of misunderstandings when the oil is replaced, the more the oil is not added, the more oil you add, the more oil will cause a lot of harm. First, too much oil will reduce the output power of the engine and increase the fuel consumption. Secondly, too much oil can damage the oil seal and cause oil leakage.
5. oil is better than a few times.
How much oil is correct? How to add the oil? In the engine of the excavator, the organic oil scale is generally used. When adding the oil, try to add a small amount of injection to observe the machine oil scale for about a minute. The purpose of the injection is to prevent too much oil from the injection.
