Loader accessory caliper disc brake is named after its shape. Controlled by hydraulic pressure, the main components include brake disc, wheel cylinder, brake caliper, oil pipe, etc. The brake disc is made of alloy steel, fixed on the wheel and rotates with the wheel. The wheel cylinder is fixed on the bottom plate of the brake, and the two friction plates on the brake caliper are installed on both sides of the brake disc. The slave cylinder piston is driven by the hydraulic pressure transmitted by the oil pipe to push the friction plate onto the brake disc for friction braking. The action is like clamping the rotating disc with pliers to force it to stop.
? caliper disc brake has the advantages of fast heat dissipation, light weight, simple structure and convenient adjustment. Especially under high load, it has good high temperature resistance, stable braking effect, and is not afraid of mud and water invasion. It can drive in winter and bad road conditions. In order to accelerate ventilation and heat dissipation and improve braking efficiency, many small holes are opened on the brake discs of some disc brakes. The disc brake applies force along the brake disc, the brake shaft has no bending moment, small radial size and stable braking performance.
?? brake caliper, including an actuator, a movable brake pad, a roughly flat rear plate of brake pad, friction material, which is installed on the rear plate of brake pad and is roughly arched to limit the outer radius of friction material and the friction surface connected with the brake disc. The brake pad limits the wear limit of friction material on the wear limit surface parallel to the friction surface.
