Actually drive an electric forklift. To learn an easy thing, the most important thing is to be proficient, to be careful when driving, to be awake at all times, and to pay attention to the details of daily life, so as to avoid some accidents.
What are the details to pay attention to? Tell you:
1. Check the control and alarm devices before driving. If it is found damaged or defective, it should be operated after repair;
2. When carrying, do not exceed the specified load, the fork must be fully inserted under the cargo, and the cargo should be evenly placed on the fork, and no single fork should be used to pick the cargo;
3. Start, steer, drive, brake and stop smoothly, and decelerate when turning on wet or smooth roads;
4. When loading, the cargo should be lowered and the mast tilted back;
5. Ramp driving should be careful. When more than one-tenth of the slope is driving, uphill should be driven forward, downhill should be driven backward, and up and downhills should not be steered. When the forklift is driving, please do not proceed. Loading and unloading operations;
6. No one is allowed to stand on the fork, and no one is allowed to carry on the car;
7. No one is allowed to stand under the fork or walk under the fork;
8. Do not operate vehicles and attachments from positions other than the driver's seat;
9. When leaving the vehicle, lower the fork to the ground and place the gear handle in the neutral position. The engine will stop and the power will be cut off. Pull the hand brake well. When parking on the ramp, you must also pad wheel.
