The excavator's high efficiency and low fuel consumption is what every excavator boss wants. We are generally familiar with improper operating habits of excavator drivers, worrying fuel quality, dangerous excavator construction conditions, improper engine maintenance, etc. are all factors that affect engine fuel consumption. Today, the editor will give you a detailed introduction based on the following points.
1. Try to avoid doing invalid actions
Doing invalid actions will consume unnecessary oil.It is best to design the construction method according to the situation of the construction site.It is unnecessary to do extra rotation.When loading the vehicle, try to take the soil in the front, try to avoid rotating to the back door to take the soil The height of the excavator should be appropriate without repeated excavation.
2. Avoid idling the engine
Even if it is idling, there will still be oil in the hydraulic pump and fuel consumption in the hydraulic pump. Assuming a 20-ton excavator, one of the 10 hours of work a day is idling, then about 20% of the fuel is wasted every day. Liters of fuel.
3. Prevent heavy load loss of pressure
When the excavated sand or stone is overloaded, the digging machine will fall into the pressure-reducing form. Assuming that 6 minutes of the 10-hour work day is the pressure-reducing form, then if this situation can be avoided, it can be saved annually Flowing about 840 litres of diesel. Problems that cannot be handled with a shovel can be divided into two.
4. Reduce the engine speed
Although reducing the engine speed will affect the workload, it can greatly reduce fuel consumption and improve fuel efficiency. Of course, the premise is not to make the work efficiency too low.
5. Reduce the hovering angle
Reducing the hovering angle when loading into dump trucks can shorten the working cycle, add the amount of work in the unit time, and then improve fuel efficiency. This is also the most useful way to save fuel.
6. Reduce engine speed when walking
The faster the engine speed, the more fuel is consumed when walking. By reducing the engine speed during operation, the fuel efficiency during walking can be improved.
