Sany excavator GPS dismantling:
1 find the GPS location
Sany the GPS fixed and remote control module of the excavator is installed next to a computer integrated block (computer panel) in the display screen on the right side of the excavator's cab.
2 attention when dismantling
When you dismantle, you have an automatic alarm induction device. You have to dismantle the power line first. From the computer integrated block (computer board), there are 4 leads (two groups) connected to the GPS module, the one is the power line, the other is the signal line, and the set of power lines will be removed.
Hyundai excavator GPS dismantling:
This article comes from the Internet
The steps of the disassembly of the modern excavator GPS are as follows:
1 dismantling the generator belt
2 throttle motor drawing wire
3 unplug the pilot switch plug
4 use a foreign battery to drive the car fire
5 fix the throttle with wire
6 normal work
Friendship proposal: demolition of excavator GPS is illegal. If your excavator is locked, it is recommended that the excavator buy the company to pay the unpaid item, so that the company can unlock it.
