A hot weather in the previous period, the machine in the morning work water temperature is still more normal, in the afternoon actually up in the middle, because it is the instrument panel is the pointer type of water temperature meter, the specific height does not know. So carefully and fearfully worked all afternoon, after work to check the plane, found that the belt was loose, tightened a little and went back.
A little rain at night, the second days will not be so hot, the working temperature will not come up, I do not know the role of naughty, or the cool weather, in a word, the temperature is normal, and then it rains, I am an idle person, I think it is to add an electronic digital water temperature meter, add water temperature. I do not want to change the original water temperature plug, if installed in the original position, the dashboard can not be used, it is worthwhile.
I searched the Internet for the modified three thermometer tubes. They were too thin for me to give up. When I sleep at night, I wonder if I can install it anywhere else. I thought that there was a water temperature plug on the side of the engine, but it no matter the water thermometer, I tried it, the water thermometer was not the same, I preliminarily speculated that the air preheating system provided data, because the air preheating was not used last year, I pulled that line out and could be used, maybe water temperature induction plug could not. Here I want to know a friend to point out. That's the water temperature plug in the back. Is there any other function besides providing data for the air preheating system?
Return to the topic, because the electronic digital display water temperature induction plug is slightly rough, screwed into the two ring wire and unscrewed, so as to be afraid of spoiling the silk mouth, so give up the continuous adding force, although it feels strong, but also afraid of work to be reversed, continue to find a place to install induction plug, suddenly I found this place can be installed.
When I dismantle the six corners, a sewer is too narrow, and an induction plug may affect the flow of water, and it is a warm air pipe. In summer, the warm air is not open, so it is afraid that the temperature is not allowed, so it is also given up.
This is suitable, located next to the water pump, water tank sewer main pipe from this, the space is big enough, the six corners of the inside, the test is just right, it is perfect, it seems to be reserved for refit.
This is the electronic digital water temperature meter I installed, the number is very clear, because of the unclear racket is not clear, the position is very beautiful, there is this temperature can be seen at any time to be accurate, no estimate, the heart can be more solid, this is better, the driving room display power, is from the radio. It is from the radio The power supply is connected to the engine, and the power cord of the inductive plug is located on the engine and connected to the inductive plug. It is OK. A little bit of mechanical knowledge and basic circuit knowledge can be done well, the following is to send my armor card butter bucket.
