First, the car should be leveled. If the digger can't be leveled, the whole thing will be uneven.
Second, eyes do not stare at the bucket, so that the eyes will be tired, upset, upset will be completely uneven, nothing to look forward to the front.
Thirdly, after a long period of time, step back a few meters to see the unevenness ahead, too close to see (I'm a person's opinion, but I never do that)
Fourth if the machine is flat, it can be flat, or the bucket teeth are flat on the ground a few centimeters (1 - 10cm can be) rotated, the rest is not said, as long as the machine is flat, the rotation can be seen after the high and low.
Fifth, find the elevation on the ground that is about to be leveled, dig when it is high, pad when it is low, load more soil away, bring it back a little bit more, and pad on the low-lying place. Dig out as high as this, and so on.
Sixth, excavate the take-off and landing arm, open the two arm to about 90 degrees with the big arm, and the bucket opens (and can also move the two arm edge), so that the bucket and the two arm arm are basically horizontal. The bucket falls to the ground to receive the two arms and pulls the soil back (90 degrees do not have to lift the arm. In fact, it is also carrying big arm in its own sense. " ) and then spin the back, and so on, in fact, there are many ways. I say simply, I can put the small arm in place, the bucket is put in place, then take the small arm and carry the big arm, and take a little roll slowly.
Seventh, for example, some very small stone powder is not good to leveling, the area is leaked from the slot in the bucket teeth, and can be taken casually, and then the square of the ring will be rotated on the ground.
Eighth, when leveling some mud or very hard soil, leveling it in accordance with the above method. If the bucket has passed through the bucket, it has not left a very long soil without digging out (the bucket is between the two bucket teeth, especially the long bucket teeth), and when it is flat to the standard height, it can be rotated and carried. When you look at the back, take a little bit of rotation, the details of the picture, see the picture, the bucket teeth print should be able to understand it, the good whole band can not see a bit of a bucket tooth print, just like the sweep of the same sweep.
Well, say this, no matter what means, can be leveled out, do not understand what can see, the master level of no spray me, I just hope you learn from each other.
