I started a shovel at the age of 17 until I was 30 years old! This year, 35, 97 years of learning should be done in the gypsum cave. Think about it. The entrance to the working face of the car must be opened for 10 minutes. Think about it now. It's not strange to drop a few stones from time to time. Do you know any brothers who have done this? Later, we went to the coal yard of our coal company for seven or eight years.
To say the highest level of the flat ground is the pile of coal. Ten thousand tons of coal pile from one layer to the other. A flat floor should generally have 50 cars around the road, which should be completed within 15 minutes. At the beginning, it has gone through many detours, but as long as we see more about others, we should quickly master skills. At the beginning, when I didn't understand it, I didn't say it flat or flat. It's a headache!
Let's go back to the right thing. We should remember that the loose material such as flat coal, remember that when you start flat to the end, your bucket must be shovel. In the middle generally do not need to clear the shovel, because coal is loose material, do not want to push the past when the successful flat when the arm slightly increased point, when the start of the push must first push the coal pile Road, in order to improve the efficiency of the general coal pile on the monk heap on the road is a car and a car unloaded, pushing the road especially to the upper arm of the road lift. The time of pushing the high point is generally Y type to push straight because the road is sure to be a car and a car row on both sides of the road must be empty, so Y type to push this point we should be able to understand that after the introduction of the big arm is improved on the road surface, so it is sure to push the head shovel a little bit higher. Everyone knows the difference between the shovel and the shovel, and everyone knows it's not a little bit of a small shovel when it's turned back to let the shovel edge a little bit to let the shovel back. Coal is compacted in order to improve the efficiency of work, but at the flat site, remember my sentence site by the trailing shovel is always unequal tow shovel can only play an auxiliary role to improve work efficiency not to waste the oil, this time do not need to continue to push this method to continue to push the situation, generally first do not thin because this is so After rough and flat, the field is basically compacted for seven to eight, and then begins to smooth away from the side. The shovel blade slightly down as much as the fact that the actual situation of the shovel can not be flat if the wear is severe, to ensure the edge of the blade or the situation of hopper.
The front wheel should be flat when it begins to push, because the front axle of the forklift and the frame are one, so as long as the front wheel is flat, the change shovel is flat, so that the driver can feel the flat unbalance of the shovel. If you feel unequal, you can adjust the size of the arm. If the error is too large, don't push the reverse. If the base face feels hard, it doesn't need a drag. It will not save the oil and will have no practical significance. Local, because the shovel will push the excess coal to just uneven place so that it can improve efficiency and save the time to feed uneven places. Step by step in this way, we should soon be able to make the field better.
In fact, this thing is just your heart! How do you move your brain? Yes! There is nothing more to see how others do it, no matter what others do is better than you. If you look at others, you will benefit from it. Oh!! No culture typing is very tired. I don't know. I can't understand clearly.
