For new forklifts or forklifts that have stopped working for a long time, within two weeks after starting to use, for bearings that should be lubricated, when lubricating, all the old oil should be squeezed out with new oil and lubricated more than twice. At the same time, pay attention to the following points.
1. Before lubrication, remove the dirt on the oil cover, oil plug and oil nozzle to prevent the dirt from falling into the mechanism.
2. When injecting lubricant with grease gun, it shall be injected until the parts of each component combine to extrude lubricant.
3. Seasonal lubricants should be replaced in summer or winter.
