Routine inspection shall be conducted before the operation of the stacker, which is an important link to ensure the normal operation of the day. Before the operation, we first check its safety state, and then check its cooling water level, oil quantity, etc.
During routine safety inspection, first stop the stacker at a safe and stable place, stop the engine, pull up the hand brake, set all control levers in the neutral position, make the mast vertical to the horizontal line, put down the fork and make the fork contact with the ground. In addition, we have to check the engine oil level Check the fan belt for cracks, wear, etc. In addition, check whether there is oil leakage or water leakage around the stacker; Check whether the tightness of mast chain is consistent; Check whether the tire pressure is normal, whether the tread is cut, whether the steel ring is deformed and damaged, and whether the screws are locked; Check whether the light system is damaged and whether the protective roof is deformed and cracked; Check whether the rear support and fork are deformed and cracked, and whether the fork positioning is normal.
After these routine checks, we can have a normal day's work.
