If there is a problem with the water tank of a small loader, it will affect our application. Therefore, timely maintenance is the key. So how should we repair it well? Next, let's take a look at the following suggestions together.
The first step that everyone needs to do is to check. When checking the water level in the water tank of the loader accessories, the engine needs to be turned off first, and the inspection should be carried out after the engine and water tank have cooled down. We should check the water level in the auxiliary water tank, but generally, do not open the water tank cover.
Next, if there is no auxiliary water tank, we must remove the water tank cover and follow the following operating instructions.
Then let's take a look at the water level of the water tank after it drops, that is, to check the surrounding air temperature by placing our hands close to the engine and water tank, but we cannot touch the engine and water tank with our hands.
Finally, we need to loosen the water tank cover to relieve the pressure on the water inside, and then slowly remove the water tank cover.
Knowledge expansion: In terms of fuel consumption for small loaders, single cylinder is definitely lower than double cylinder, and when choosing a small loader, we also need to consider economy. The overall structure of the vehicle is relatively durable, so when purchasing a small loader, the editor provides a few suggestions.
Firstly, when purchasing a small loader engine, single cylinder engines are connected by belts, which can cause some inconvenience in the starting and clutch applications of old cars. Especially for our small loaders, the clutch is prone to problems. Therefore, I suggest that you choose the pressure plate clutch of Jingong small loaders. In this case, the engine can only choose dual cylinder or above. The transmission is usually pedal type, with high bottom speed, which basically does not need to consider the stability of the entire car frame structure. As mentioned above, in terms of new car price, user comfort, and future maintenance costs, it is a relatively economical application. Although it is convenient to use, the maintenance cost in the future is high. I personally think that the performance of small loaders is very unstable and prone to problems.
