If the loader is not stored for a long time, it should be carefully maintained, otherwise the loader accessories will be damaged. The following are the issues to be noted:
_1. It should be parked in a dry room. If you must park outdoors, choose a flat surface and lay boards. Cover the parking area with a cloth.
_2. Storage of the engine. Release cooling water from the engine. Change engine oil. New oils are usually neutral and do not corrode the metal parts of the engine. The tank is full of diesel to avoid rust. If conditions permit, preservatives should also be added. Start the engine once a month during shutdown to allow the machine to run for short distances and to create a new oil film at the lubrication of the components to prevent rust. It should be noted that the cooling water should be filled before starting and at the end.
_3. Before long-term storage, the machine must be maintained, damaged parts repaired, thoroughly cleaned and maintained in good technical condition.
_4. Storage of batteries. Remove the battery and place it in a dry and antifreeze place. In order to keep its surface clean and dry, it is prohibited to place conductive objects on the battery. When removing the battery, cut off the negative line and then the positive line. When installing, connect the positive wire first and then the negative wire. Since the electrical system of the used loader is negative ground, it prevents short circuits when removing batteries. Lead-acid batteries should be charged once a month.
_5. Anti-rust treatment. Prior to storage, it is necessary to determine whether the paint should be repainted or repainted according to the size of the peeling off surface. Working devices of second-hand loaders, such as ironing plates of pavers, buckets of loaders, scrapers of graders, etc. Anti-rust measures at metal exposures are buttered.
