1. The tires should be stored in the warehouse. Keep dry and ventilated in the warehouse to avoid exposure.
2. The tires should be far away from heat sources, power generation equipment and ozone production sites. Do not mix with oils, easy substances and chemical corrosives.
3. The outer tire or the complete set of tires should be placed upright. It is strictly forbidden to lay flat or stack the goods through the heart. Large tires are only allowed to stand in a single layer, and medium and small tires are allowed to be placed in double layers. Rotate it once every two months.
4. If the inner tube needs to be stored separately, it should be filled with an appropriate amount of air. When hanging on a semi-circular wooden frame, the fulcrum should be rotated regularly, and it should not be folded flat or stacked.
5. The tire storage shall have an inventory card, which records the tire type, specification, level, brand, production and storage time, and is stored in batches according to the production and storage time, first-in first-out, and used in order.
6. When transporting tires, do not mix them with oils, flammables, chemical corrosives, etc., and cover them with tarpaulins to avoid sunlight or rain. Long-distance transportation must be established. When the inner tube cannot be packed separately, it needs to be in the outer tube and inflated in an appropriate amount.
7. Handling of tubeless tires (1) The tires in the packaged state must not be folded with a steel belt for protection of the bead and crane. (2) The unloaded tires should be kept in a vertical position during storage and transportation, and should not be stored horizontally. (3) Do not use ropes, hooks or forks to lift the tires directly, and use wide fiber belts. (4) When using a forklift to move the tire, do not use the fork to insert into the center hole of the bead for lifting. Use the fork to lift from the side of the tire.
