As we all know, concrete mixer is a commonly used machinery in concrete machinery, often used in major construction sites. So, what is its operation process and cleaning matters?
1. Operation process of concrete mixer
1. Turn the function switch on the column to the "automatic" position and press the start switch on the controller, the entire operation program will automatically control the operation.
2. Automatically stop after the whole process is completed. If you need to stop halfway in the running project, you can press the stop button and restart.
3. After pressing the start button, the display will start to display the time, slow speed, sand addition, fast, stop, fast, running indicator flashes on time.
4. During automatic control, all manual function switches must be set to the stop position.
Operation matters
1. The gap between the blade and the pot wall should be 3mm±2mm with a measuring gauge. If the gap exceeds the tolerance, the up and down position of the blade can be adjusted to reach the specified range.
2. After each use, the stirring blades and pots should be cleaned in time, and the electrical parts should avoid violent vibration, keep away from water and high temperature, and pay attention to dust.
Knowing how to use the mixer can better improve the engineering work efficiency.
Second, the cleaning matters of the concrete mixer
1. Carry out regular maintenance and maintenance work on the items specified in the maintenance regulations, such as cleaning, lubrication, refueling, etc.
2. Before starting the concrete mixer, check whether the controllers are good. After the shutdown, pour water and stones into the mixing drum for 10 to 15 minutes for cleaning, and then clear the water and stones. If the operator must enter the mixing drum for cleaning, in addition to cutting off the power and removing the fuse, and must lock the switch box.
3. It is forbidden to use a sledgehammer to remove the concrete accumulated in the concrete mixer barrel, which can only be removed with a chisel.
4. In the severe cold season, after the work is completed, the mixer drum should be cleaned with water and the accumulated water in the pump, water tank, and water pipe should be drained away to prevent the pump, water tank, water pipe, etc. from freezing.
