Friends who are familiar with forklift trucks may know that an assembly is a series of parts or 名媛直播 that form a whole that achieves a specific function. The general term for this system is the assembly. Today, the editor will introduce how to replace the friction plate assembly.
1. First step on the clutch pedal to disengage the friction plate.
2. Turn the sliding screw on the upper end of the gearbox counterclockwise to retract the drive shaft into the gearbox.
3. Remove the bolt of the pressure plate shell to disengage it from the flywheel, and take out the old friction plate assembly.
4. Install the new friction plate assembly. It should be noted that the longer end of the spline sleeve of the friction plate hub extends toward the gearbox side.
5. Turn the sliding screw clockwise to gradually pull out the active bearing and insert it into the spline hole of the friction disk hub.
6. When it is judged that the driving shaft has indeed entered the flywheel intermediate bearing, then lock the sliding screw and tighten the torque.
7. Install the pressure plate shell on the flywheel.
8. It is also necessary to adjust the clutch pedal stroke.
The above is the method of replacing the friction plate assembly of the forklift. I hope to help you solve the problem.
