When the electric forklift is running, no one is allowed to stand on the fork. When it is really necessary for auxiliary personnel of electric forklift to work, a special basket for electric forklift shall be equipped, and the fork shall be forked into the special fixing slot under the basket.
If the nature of high-altitude operation is basically harmless work such as inventory and labeling, the driver shall not leave the electric forklift in order to provide assistance in time;
If metal tools are needed to repair lamps and pipelines, the driver of electric forklift can choose to wear safety helmets and sit in the cab for assistance. Irrelevant personnel are not allowed to operate electric forklift.
In principle, electric forklifts are not allowed to overtake, but when overtaking parked vehicles, slow down and sound the horn and pay attention to observation.
When there is a fork at the front, the height of the door should be 400-150 mm from the bottom when driving.
Do not raise the fork too high when driving; When entering and leaving the operation site or driving, pay attention to whether there is any obstacle scraping and collision above; When the load is driving, the fork shall not be raised too high, which will affect the stability of the forklift.
It is strictly forbidden to stop the forklift when it is driving downhill, and it is forbidden to brake suddenly when it is driving with load except under special circumstances.
After unloading, lower the fork to the normal driving position before driving.
When turning, if there are pedestrians or vehicles nearby, send out the driving signal first. It is forbidden to turn sharply at high speed, which will cause the vehicle to lose lateral stability and overturn.
The forklift shall comply with the traffic rules in the plant when running, and must keep a certain safe distance from the vehicle in front. When passing the workshop door and intersection, it shall be slow, look twice and pass three times; When stepping on and releasing the accelerator pedal, it shall be gently stepped on and lifted, and it is not allowed to step on and release or shake continuously;.
When the forklift is running, the load must be at the lowest position that does not hinder driving, and the gantry shall be tilted back properly. Do not raise the load except when stacking or loading. The height of the load shall not block the sight of the driver. Under special circumstances, when objects affect the line of sight of the front line, drive at a low speed when reversing
It is forbidden to turn on the ramp, lift and tilt forward during driving.
The safe driving speed of forklift truck in the plant area is 5km / h, and it must drive safely at low speed when entering the production workshop area.
When lifting, lifting or driving the forklift, it is forbidden for personnel to stand on the fork to hold objects and balance.
If problems are found, they shall be repaired and reported in time. Never work with diseases or hide them.
