The clutch is an important part of the loader, so when using the loader, we often attach great importance to the maintenance of the clutch. So, if the clutch fails, what is its performance? Before the clutch fails, the following abnormal conditions usually occur:
??1. The machine can still work because the transmission oil has deteriorated, the viscosity has been reduced, and there are metal impurities, so it is recommended to change the oil more frequently before sampling, analysis and transmission. Because the wear of the clutch is a sign of gearbox failure, if the gear or gear metal impurities make it impossible, if it is not closed, other workpieces will break and be transported.
??2. Decreased transmission performance is a sign of damage. The clutch slips, even if it accelerates smoothly, the machine will move forward and should stop at this time.
??3. The clutch working oil level drops. When the machine must accelerate the clutch engagement, it means that the clutch is excessively worn or the seal fails. Therefore, measuring the transmission oil pressure and observing the increase in oil temperature can determine clutch wear. The oil must also be analyzed at the same time. If there are iron or chromium particles in the oil, the gears have begun to wear.
??These are common phenomena before clutch failure. Therefore, after reading the knowledge of this article, we should pay more attention to it and take precautions in time to make the clutch work normally and avoid malfunctions.
