The principle of the loader accessories, the working device should ensure the operation of the loader: the loader accessories tell you that when the bucket cylinder is locked, the boom cylinder is raised or lowered, and the link mechanism makes the bucket up and down or close to the flat loader accessories tell you Avoid spilling materials when the bucket is tilted; when the boom is in any position and the bucket rotates around the hinge for unloading, the bucket tilt angle is not less than 45 °, and the bucket can automatically level the shovel when the boom after unloading drops Fight. There are seven types of loader working devices at home and abroad, which are divided into three-bar type, four-bar type, five-bar type and six-bar type according to the number of parts of the link mechanism. -bar type and eight-bar type.
Loaders are mainly used for shoveling, loading, unloading, earthwork and stone, and can also be used for light excavation of rock and soil and hard soil. If you change different work equipment, you can also do the work of bulldozing, lifting, loading and unloading other materials. In highway construction, it is mainly used for the filling and excavation of roadbed engineering, aggregate and loading of asphalt and cement concrete yard.
Because of its advantages of fast running speed, good maneuverability, and easy operation, it has developed rapidly and has become the main machine for earthwork construction.
The manufacturer of loader parts tells you that large and small wheel loaders are affected by objective conditions and market demands during the development process. The competitive media loader will be updated faster. Kunming loader accessories tell you to redesign the overall design according to the actual situation of each manufacturer, optimize various performance indicators, enhance the strength and rigidity of structural parts, and thus greatly improve the reliability of the whole machine. Optimize the system structure. Such as the vibration reduction of the power system, the optimization of the structure of the heat dissipation system, the optimization of the performance index of the working device, and the dustproof and industrial design of each hinge point.
