The loader parts can be roughly divided into four parts, namely: engine, torque converter, drive axle and gearbox. In the article, the purpose of these components and the accessories of the Shantui loader are explained in detail. For daily maintenance, friends in need can find:
First, the engine is a machine that can convert other forms of energy into mechanical energy, including internal combustion engines, external combustion engines, electric motors, etc.
Second, the torque converter of the loader parts has three pumps, the working pump (supply boost, reverse pressure oil) steering pump (supply steering pressure oil).
Third, the gearbox mainly refers to the gearbox of the car, which is divided into manual gearbox and automatic gearbox. The manual gearbox is mainly composed of gears and shafts, and the transmission torque is generated by different gear combinations; the transmission AT is composed of a torque converter, planetary gears and a hydraulic operating system, and the transmission torque is realized by the combination of hydraulic transmission and gears.
4. The drive shaft of the loader accessories usually consists of the final drive, differential, wheel drive and drive axle housing. Its function is to bend the power transmitted by the universal joint device by 90 °, change the direction of force transmission, and reduce the speed through the main reducer. After increasing the torque, the differential is distributed to the left and right axles and the drive. wheel. Loader components have the advantages of fast working speed, good maneuverability, and easy operation. They have achieved rapid development and become the main machinery for earthwork construction. As an ordinary machine, if you do not pay attention to the maintenance of the loader components, the loader will inevitably cost more.
Daily maintenance operations of loader parts need to pay attention to the following points:
1. The driver of the loader should wear it according to specific safety requirements and take some protective measures.
2. If the loader is in a very small or dangerous area, the relevant warning sign should be displayed in this range or related danger point.
3. If related maintenance or inspection work is to be carried out, if it is hinged in the center, an anti-rotation bar needs to be installed to prevent the front and rear frames from rotating.
4. Before using the loader accessories, you must read the relevant knowledge, especially the instruction manual or related operation and maintenance manual. These regulations must be strictly implemented, otherwise there will be serious consequences. This will also cause related losses.
