Every thing has a running-in phase when it is used, and loader parts are no exception. Therefore, there must be some precautions when using it in the running-in phase to facilitate future use. What are the preventive measures for the loader parts during the running-in phase?
1. Frequently add lubricating oil during running-in: regular addition of lubricating oil can reduce the degree of wear, and lubricating oil can also reduce the noise of the machine during operation.
2. Avoid overload operation during running-in: during running-in, it is easy to cause parts to wear too quickly, so overload operation should be avoided as much as possible.
3. The loader parts should be checked frequently during wear: During the initial use of the loader parts, due to the impact of shock, vibration and other alternating loads, as well as heating, deformation and other factors, plus the reasons for excessive wear and tear, it is very It is easy to loosen the originally fastened parts, so the loader parts should be checked frequently.
The running-in period of loader parts is a very important stage, so there is a need to have a good running-in period during the running-in period to reduce the occurrence of unexpected failures during use.
