Consumers buying used forklifts are nothing more than cost savings. However, as the use time of the forklift increases, its own value continues to decrease. Now there are many types of vehicles in the market, and there are many brands with rich prices. Which types of vehicles have high value and high residual value? According to the analysis of professionals, the main factors that affect the residual value of old cars are summarized as follows.
First, the identity of the vehicle
The "birth" of the car itself has a greater impact on the residual value of the vehicle. Taxi and rental cars are inferior to the official car and private car. They have more mileage and the scrap period is shorter. Half of type car. Generally speaking, the vehicles with higher residual value are private cars and large institutions.
Second, the brand share of vehicles
名媛直播, like other 名媛直播, high visibility and market share will greatly increase their value. In the old car trade in China, the self-value of Heli Forklift, Hangzhou Forklift, and Japanese-brand vehicles is higher than that of brands of other origins, and the people have a higher degree of recognition.
3. The quality and technology of the vehicle itself
As a comprehensive product, has higher requirements for safety, maneuverability, comfort, technology, environmental protection and energy saving. If the quality of the vehicle itself is low and the technology is poor, the condition of the vehicle will be very poor after three to five years of use. Therefore, the “bargain goods” manufactured by some small manufacturers tend to have a low level of value preservation and serious depreciation.
Fourth, the use of the car itself
The condition of the vehicle is one of the most important determinants of the residual value of the vehicle itself. The price of a vehicle that uses the same time depends on the performance of the vehicle. If there are relatively large repair marks and accident marks in the key frames, chassis and engine of the vehicle, the residual value of the vehicle itself will be greatly reduced. In contrast, the "residual value loss" caused by other damage to the vehicle is much smaller. For example, the tail lights are not bright, tire wear, etc. mostly have little effect on the residual value of the vehicle.
Five, vehicle maintenance and use costs
Wise consumers can still afford a car after buying it, and the daily use and maintenance costs of the vehicle have a great impact on the residual value of the vehicle. Therefore, most consumers choose Heli and Hangzhou Forklift as more used ones! Some large manufacturers have more service outlets in Shanghai, good repair quality, cheap spare parts, low daily maintenance costs, and low fuel consumption. Can save consumers the necessary expenses of thousands of yuan to tens of thousands of yuan. The economic benefits of these cars will inevitably attract more users of used cars, so the convenience and economics of the use and maintenance of the vehicles also affect the residual value of the vehicles. Some imported cars and models of small domestic manufacturers often cause man-made residual value due to fewer spare parts and high maintenance prices.
Select used forklift
Buying a second-hand forklift is to save investment costs and produce good economic benefits as soon as possible. However, if you do not select a good forklift, then you may have bought a medicine jar, delaying production, not to mention, daily maintenance is not very troublesome what? Below, I briefly introduce what should be paid attention to when choosing a used forklift?
First look: how to look? Look there? Stand in front of you to see if the gap between the top and bottom of the mast is consistent. If the top and bottom are different, it proves that the forklift has worked for a long time due to overload, or there have been accidents. Squat down to see if the steering system below the rear is consistent with the introduction. There are two types of steering: mechanical and hydraulic. The hydraulic pressure is also divided into full hydraulic and mechanical hydraulic. Maybe the names are different in different places, but you can understand the specific meaning. See if the gap between all the connection parts is large. If it is large, it proves that the car has a high utilization rate. After buying, it is likely to increase the maintenance cost.
Listen: Start the car, listen to the engine to see if there is a clear answer, whether the engine is running smoothly, after adding the throttle a few times, let go of the throttle to see if the engine's response is sensitive. If there is a defect, you should know how Did it, try: no-load test, full load, look at the performance of the whole car, if it can reach more than 85% of the new car, it should be considered good. No load, the load should be small throttle and medium oil, stop at full load, turn off the flame, and see if the goods on the gantry sink, the time should be about 5 minutes.
