Parking Site Selection
Prioritize choosing a garage
Flat open ground with no standing water in the courtyard
Avoid parking in damp, waterlogged, or easily waterlogged areas
To prevent rusting and corrosion of machine components
Stay away from flammable and explosive materials, open flames, or high temperature areas
Prevent tires from exploding or causing fires due to heat
Parking operation steps
Move the gear shift control lever to neutral position
Pull up the handbrake and apply the parking brake
Place the bucket completely flat on the ground
Return the control lever of the working device to the neutral position
Release work system pressure
Press each switch to the center or "off" position
Turn off the main power switch
First remove the negative wire, then remove the positive wire
Finally, lock the car door
Remove the battery from the machine
Store separately in a dry and ventilated place
Regularly charge to prevent power loss
Note: For short-term parking, the battery does not need to be disassembled
System inspection and maintenance
Clean the air filter element
Drain the remaining liquid at the bottom of the water tank
Check the tightness of the fan belt
Ensure that the oil level is normal
Drain moisture from the gas storage tank
Check if the brake fluid is sufficient
Clean the brake disc and brake pad impurities
Check if the tire pressure is sufficient
Check the hydraulic oil level
Add lubricating grease to each connecting pin
Apply anti-corrosion and rust proof oil to the oil cylinder piston rod according to the actual situation
regular maintenance
If the device is parked for too long
The engine should be started and operated every two weeks
Establish a new oil film at the lubrication points of each component
Charging the battery while preventing rust
