Before the operation of the stacker, routine inspections are required. This is an important part of ensuring the normal operation of the day. Before operation, we first check its safety status, and then check the cooling water level and oil volume.
During the routine safety inspection, first park the stacker in a safe and stable place, stop the engine, pull up the hand brake, set all control rods to neutral position, let the mast be perpendicular to the horizontal line, put down the fork To allow the fork to contact the ground. In addition, we also need to check the engine oil level. Check the fan belt for cracks, wear, etc. In addition, check the surrounding of the stacker for oil leakage or water leakage; check whether the tension of the mast chain is consistent; check whether the tire pressure is normal, whether the tread is cut, whether the steel ring is deformed, damaged, and whether the screw Lock; check whether the light system is damaged and whether the roof canopy is deformed and cracked; check whether the rear support frame and fork are deformed and cracked, and whether the fork positioning is normal.
After doing these routine inspections, we can do a normal day's work.
