For a new forklift or a forklift that has stopped working for a long time, within two weeks of starting use, for bearings that should be lubricated, when lubricating, it should be
Use fresh oil to squeeze out all the aging oil and lubricate it more than twice, and pay attention to the following points.
1. Remove the dirt on the oil cap, oil plug and grease nipple before lubrication to prevent the dirt from falling into the mechanism.
2. When injecting the lubricant with a grease gun, it should be infused until the parts are extruded with lubricant.
3. Seasonal lubricant should be replaced in summer or winter
