Three ways to park the excavator The parking of the XCMG excavator is a maintenance link that can be easily overlooked. Once on the construction site and municipal construction site, the excavator parked randomly is often seen in various postures and forms. However, in the maintenance of XCMG excavators, the parking of excavators is also a very important part, so I have summarized this article for everyone and hope that it will be helpful to the owners and operators.
Let's take a look at how to park the excavator correctly.
Parking excavation opportunities are convenient for checking hydraulic oil and discharging diesel water before work the next day. Whenever it is raining, snowing, or thundering, it is recommended that everyone stop this way, so that the stop can better protect the cylinder of the excavator. When the excavator is not working for a long time and is shut down during the New Year, the excavator must be stopped in this way. This stop can allow the oil cylinder to be completely soaked in the hydraulic oil, so that the oil film can be crossed on the oil cylinder, which greatly protects the life of the oil cylinder. , Will not let it corrode.
But also be careful not to park this way every time you leave work, such a long-term shutdown method will have an adverse effect on the excavator. A machine owner once said that such downtime has an impact on the balance of the center of gravity of the excavator turntable.
The way to stop is the most common, but it is not convenient to stop the machine the next day to see the hydraulic oil and the diesel water. Some machines have hydraulic oil that is leaking from the arms and buckets. Each machine has a way to see the hydraulic oil. The sticker is stuck inside the side door or around the hydraulic oil mark.
Shutdown mode The 90-degree vertical arm of the arm is flush with the back of the ground bucket. Keep all cylinders in the unstressed state when parking, and there is no damage to the cylinder oil seal. But this way the bucket cylinder will show up! So the problem is coming, most of them generally park the bucket cylinders to prevent accidents!
Also need to pay attention to the state of the bulldozer:
Pay attention to the bulldozer, it is put directly in the end, but if you buy a new digging machine, it is best not to drop the bulldozer every night after work. Do not drop the bulldozer cylinder. If you drop it, you will have to sell it and check it later. If you do not handle it in time, the speed will drop faster and faster, seriously affecting the normal operation of the machine in the future.
Conversely, if the bulldozer does not drop, the excavator will drop to the bottom every night after work, because if you do not lower the bulldozer and the ground, there will be a distance between the bulldozer and the ground.
