1. Before disassembly, please pay attention to the position of the switch before closing the disassembly and installation procedures, disconnect the battery plug, use the control lever to guide
The remaining pressure of the tube is released. Keep the working environment clean and avoid entering the interior. When disconnecting the catheter, cover the surrounding area with a rag to avoid oil pollution.
Spare parts. No foreign matter can enter when connecting the catheter. The disassembled parts should be placed on clean paper or rags, and should be used for hours to avoid contamination and scratching
Marks or dents. Suspension and lifting require professional storage electric forklift maintenance personnel. Handling heavy objects requires two people to work together.
2. Forklifts wrap the sealing tape on the tapered thread, and do not allow fragments of the sealing tape to enter the hydraulic pipeline. Use O in the joint when connecting each hydraulic component
Before installing the ring, install a guide on the joint thread and insert the O-ring in order to avoid damage to the O-ring. Need to tighten the joint by hand, and make sure
After the head position, tighten the lock nut to the specified torque.
3. Release hydraulic oil before removing the suction pipe.
4. The hose, the hose should be checked for leaks, aging or damage before disassembly. The hose should be replaced. Leaked or damaged connections should be replaced
change.
5. For catheters, check the catheters for leaks, bends, breaks, or scratches before disassembly. The catheters should be notified to the storage electric forklift repair company.
replace. Leaked or damaged connections should be replaced.
The above is about the dismantling method of the hydraulic pipeline system in the maintenance of the forklift, and I hope it will be helpful to everyone.
