Many people think that it is difficult to brush up the slope. In fact, it is not so difficult to imagine. At best, it is an upgrade version of the leveling. However, some details should be paid attention to. As long as we understand the essence of the brush slope, the brush slope is so easy for you.
Before the slope is brushed, the slope ratio is first given to you, the ratio of the slope to the vertical height (H) and the horizontal width (L) of the slope is compared to that of the =h/l, which is usually expressed in the form of 1:x.
Next I will talk about my experience in the process of brush up with my own experience.
First, want to brush out the perfect slope, first of all, to achieve the heart without thinking, in order to achieve the state of man-machine integration, I in the car, the car in my heart, must let the excavator moves with your heart, as you want! If you can get to this state, you will really feel that it is a pleasure to open the excavator and give you a different feeling.
Second, brush the slope, first of all to smooth the road, brush the slope process can not shake the machine, but also to observe the surrounding obstacles, do the eyes of six ways to listen to the eight sides, the environment around the machine in your heart!
Third, the position of the brush slope, the position here has two meanings, one is the position of the car. In the process of parallel brush slope, the first should be to keep the body and the brushed slope parallel. If the car goes off, the slope will follow the car, the details must be paid attention to, the other is the driver's position, the driver is in the process of brush slope. The angle of view is very important to me. For me, the distance between the track and the break is fifty or sixty centimeters. The purpose is to adjust the angle of the slope, to see the whole slope and to have a little surplus. This is only my personal habit.
Fourth, brush slope to do three side of the brush slope will not be a problem, then I will tell you how to see three points, the first point is the point of the slope angle, the popular point is the bottom of the bottom of the slope, the bucket must be stable when the bucket. The second point is the bevel, slope angle and the slope of the two points will form a straight line, first we want to brush out this line, after the brush level, we have to see third points, third points and the other two points different, this point in the tooth tip, with the movement of the teeth, this point is more difficult to control, the need to control If you don't stare at this point, if you are a little distracted, the slope will be unsatisfactory. When the first line is brushed out, each of the next times should coincide with the previous point. It is suggested that each of the shovels and the top shovel coincide with 1/3. The more the overlap points, the more smooth the slope will be, until the whole process is brushed!
