The shape design of the loader seat must conform to the physiological functions of the human body, and strive to be beautiful on the premise of ensuring comfort. The seat must be safe and reliable, with sufficient strength, rigidity and durability, compact structure and low mass. It should also meet various adjustment mechanisms for the comfort of drivers and passengers, and have reliable locking devices to ensure safety. What should be paid attention to when installing the loader seat? How can the layout of the whole carriage be more reasonable?
??The seat and the base are connected by four bolts to form a seat assembly. The seat assembly is installed on the floor of the cab with a height of 270 mm. The height adjustment is divided into three levels from -30 cm to 0-30 cm. The height of the base is 180 mm. The base of some loaders is also used as a tool box. Installed on the toolbox.
??When the loader heater or air conditioner is selected, the seat can be installed on the heater or air conditioner evaporator through the transition plate. At this time, the heater or air conditioner evaporator is equivalent to the seat base. With this structure, the seat is connected to the heater or the air-conditioning evaporator through the transition plate. There are 8 through holes with a diameter of 11.5 mm around the transition plate where the heater and the air-conditioning evaporator are installed, and there are 4 counterbore holes in the middle for fixing the seat.
