Whatever you do, it will take a long time to get used to it. Open excavators are no exception. We often say that we should extract its essence and remove its dross. For those good habits, we should continue. People who have experienced engineering experience more or less have the problem of diesel engine startup, then what is the cause that causes this phenomenon to happen frequently? Is there a solution? Next, follow the steps of Xiaobian to analyze the secret of diesel engine one by one.
1.
If the coolant is not added before the diesel engine is started and the coolant is added after starting, it will easily cause the body and parts to rise too fast, accelerate the wear of the machine parts, and cause the engine to crack easily when the hot machine is added to the cold water.
2. Long time use starter
The 1 starting time of the starter is too long, which not only causes the battery to discharge for a long time, but also makes the battery plate produce bending and vulcanization.
3.
It is very easy to aggravate the wear and tear of the vehicle transmission mechanism and running mechanism, and even cause mechanical accidents.
4, the sliding boot of the refrigerator
When the refrigerator is lubricated, the viscosity of the lubricating oil is large and the lubrication is bad. So the use of sliding start will not only aggravate the wear of the vehicle, but also cause the brake failure.
5, use open fire to start
When the air inlet is ignited, the air filter should be dismantled, which easily leads to the direct entry of the outside dust into the cylinder, accelerating the wear of the cylinder, piston and piston ring, and at the same time makes the diesel engine deflagration and increase the carbon deposition.
In addition, in the cold winter, the use of the open fire diesel engine to start the preheating of the car, it is easy to cause the oil bottom shell to burn and the oil to deteriorate, causing the circuit wire to burn out and cause the fire more easily.
