1.Safe lifting to prevent slipping
There is a hook behind the general bucket, which is the most secure for lifting. Especially when you need to lift the object to a certain height, if the rope is hung on the bucket teeth, it will easily fall off during the lifting process. The use of a hook can ensure that the rope does not slip, which is the most recommended safe lifting method.
When the object to be hoisted is close to the excavator, it is very suitable to directly lift the object with bucket teeth. In addition, if the lifting distance is not very high, the bucket tooth hook is also very convenient and efficient.
2. Stable under plate to prevent rollover
A stable body is the precursor to efficient and safe operation! When hoisting, the excavator must stand on a horizontal stopping surface; if you must hoist an object on an inclined surface, you can first dig out a horizontal stopping surface. The orientation of the excavator chassis is also very important. The smaller the included angle between the hoisting direction and the track direction of the chassis, the safer the excavator is, and the larger the included angle is, the easier it is to cause the excavator to overturn.
When the excavator is hoisted, it is actually a lever state. Pay attention to the distance from the center of gravity of the load to the center of gravity of the excavator.
The closer the hoisting object is to the center of gravity of the excavator, the safer the excavator will be and the maximum lifting capacity can be exerted; the farther the hoisting object is from the center of gravity of the excavator, the greater the danger of the overturning of the excavator and the more affected the hoisting capacity of the excavator is. limit.
3. Reasonable operation Safety first
Pay attention to lifting objects. Do not lift too high when you do not need to lift too high. Once the excavator is in danger of overturning, lower the boom immediately and place the lifting object on the ground quickly.
The last point is to ensure that there are no people nearby when hoisting. Before hoisting, make sure that the hoisting ropes are vertical to prevent collision and death.
